Award details

Ultrasound modulated optical tomography for functional imaging of engineered tissue

Reference	BB/F004923/1
Principal Investigator / Supervisor	Professor Megan Povey
Co-Investigators / Co-Supervisors
Institution	University of Leeds
Department	School of Food Science and Nutrition
Funding type	Research
Value (£)	252,624
Status	Completed
Type	Research Grant
Start date	01/05/2008
End date	31/10/2011
Duration	42 months

Abstract

A new imaging system combining the resolution of ultrasound with the functional information of optics will be developed. In tissue engineering, samples that are being grown are increasing in size and this makes it impossible for them to be imaged using conventional optical microscopy. New approaches are therefore necessary to image tissue function. The new system will use ultrasound to modulate light that passes through the focus, allowing the effects of scattering to be overcome. This will allow fluorescence to be imaged within thick tissue (~1cm) in 3D, at high resolution (better than 100 microns) and will provide a valuable new tool for tissue engineers. The novelty of this research is; 1) Development of an ultrasound modulated optical tomography system to image fluorescence within thick tissue at high resolution. 2) The use of non-linear acoustic techniques to maximize signal to noise ratio and resolution. 3) Demonstration of the first 3D, high resolution, fluorescence images of thick tissue in tissue engineering 4) Simultaneously mapping excitation and emission wavelengths that enables the quantitative mapping of absorption and fluorescence properties of the tissue Within this project the system will be used to image fluorescently labeled tissue but if successful the approach could also be applied to imaging bioluminescence, fluorescence lifetime imaging and imaging the response of nanosensors embedded within tissue and scaffolds.

Summary

Tissue engineering is the growth of new tissue or organs for clinical use, which could have a profound effect on medicine in the future. Biologists routinely use microscopes to understand the way that cells combine to form tissue. However, as the tissue being grown within the laboratory becomes thicker (2mm-1cm) then conventional microscopes cannot be used. The reason for this is that light is heavily scattered by tissue (this is the reason that you can't see the bone in your finger when you hold it up to a light bulb). New imaging methods therefore need to be developed to allow imaging of thick tissue using light. Ultrasound is a method that is routinely used in medicine for imaging thick tissue and is very useful for measuring the mechanical structure of tissue. However it cannot obtain the same functional information that can be obtained using light. For example, light can be used to detect the fluorescence of cells or the oxygen content of the blood. Within this project we will develop a new device that combines light and ultrasound to image thick tissue. This new device will provide the functional information of light at the image resolution of ultrasound. The device is based on the principle that when light passes through ultrasound it becomes modulated at the frequency of the ultrasound. This allows one to use ultrasound to place a flashing beacon of light within the tissue at a precise location and provides a method of working out where the light has been within the tissue. Moving the focus of the ultrasound to different locations within the tissue (as would be done in conventional ultrasound imaging) allows one to build up an image of light within the tissue at the resolution of ultrasound. There are several technical challenges to developing such a device as the interaction between light and sound within tissue is very weak and hence the modulated light signals emerging from the tissue are very weak. The group has expertise in light interaction withtissue, the design of medical instruments and ultrasound and we will combine this expertise to increase the size of the light signal emerging from tissue and make the light detection as sensitive as possible. One example is to use more than one source of ultrasound and interfere the ultrasound waves to provide larger light signals and better resolution. In addition we will use computer simulations to model the way light propagates through tissue and interacts with the ultrasound. This will help us understand the best way to position the ultrasound sources and light detectors to achieve the best performance. The engineers and biologists will work closely together during the project to ensure that we are constructing a useful device. Experiments will be performed to image fluorescent signals within tissue at the resolution of ultrasound during the project. The main aims can be summarised as follows; 1) Development a system combining light and ultrasound to obtain images of light within tissue at the resolution of ultrasound. 2) Use novel ultrasound methods to make the light signals emerging from the tissue as large as possible. 3) Obtain the first images of fluorescence at high resolution within thick tissue 4) Simultaneously measure the original light colour and the fluorescence within tissue. The new device will provide an important new tool for tissue engineers.

Committee	Closed Committee - Engineering & Biological Systems (EBS)
Research Topics	Industrial Biotechnology, Regenerative Biology, Technology and Methods Development
Research Priority	X – Research Priority information not available
Research Initiative	Technology Development Initiative 2 (TDRI2) [2007]
Funding Scheme	X – not Funded via a specific Funding Scheme

Associated awards:

BB/F004826/1 Ultrasound modulated optical tomography for functional imaging of engineered tissue

I accept the terms and conditions of use (opens in new window)

export PDF file

back to list new search