Award details

Online Microbial Fuel Cell Biofilm BOD Sensor (with InnovateUK)

Reference	BB/P000312/1
Principal Investigator / Supervisor	Professor Ian Head
Co-Investigators / Co-Supervisors
Institution	Newcastle University
Department	Sch of Natural & Environmental Sciences
Funding type	Research
Value (£)	30,461
Status	Completed
Type	Research Grant
Start date	01/04/2016
End date	31/03/2017
Duration	12 months

Abstract

Summary

The project aims to manufacture and develop an online Microbial Fuel Cell-based biosensor for rapid, online detection of Biochemical Oxygen Demand (BOD) to be used at wastewater treatment plants. The BOD provides a measure of the amount of biodegradable carbon, a constituent that is regulated to protect water quality. Current techniques for measuring BOD are either time-consuming and resource-intensive, or provide over-estimates of true BOD. Bioelectrochemical Systems (BES, a type of Microbial Fuel Cell) offer a potential solution for BOD sensing, in which the concentration of biodegradable material consumed by the anodic biofilm is proportional to the electrical current generated. Monitoring that current provides a measure of BOD in real time (or close to real time). The online BOD sensor developed in this project will enable water treatment companies, and other industries that discharge effluent containing organic matter, to continuously monitor BOD. For the first time, they will be able to use real time, continuous monitoring to economically optimise various treatment protocols to control BOD. Real time monitoring is currently not possible, as for each variation in operating parameters a large number of expensive and time consuming off-line BOD tests would have to be performed. Improved monitoring will also bring direct benefits by alerting operators as the discharge BOD approaches the consent limits, allowing action to be taken before the limits are breached and a fine is incurred, a situation that is not currently possible. There are clear environmental benefits to having improved control of the BOD in discharged water, where areas downstream of the treatment plants are no longer subject to wild fluctuations in BOD and a stable ecology can be managed. The project builds on work from a PhD project at Newcastle University, taking the design and concept and developing it into a commercial product that meets industrial needs. The BES-based BOD sensor will bedeveloped, tested and calibrated. The project has a number of stages, as shown below. University of South Wales will lead on electrode design and fabrication. Newcastle University will will lead on testing and calibrating the sensor. 1. Design the sensor to be used in the project, ensuring the design meets the project requirements. 2. Design the upstream sample handling systems for waste to be passed to the sensor. 3. Build the BES sensor. Built sensor to be shipped to Newcastle for set-up and calibration. 4. Build the sample treatment system. Built system to be shipped to Newcastle for integration with sensor. 5. Probe set up and calibration. Newcastle to test the probe is stable and to calibrate under a variety of agreed conditions, including toxicity conditions. 6. Software Development. Newcastle will provide the algorithm from the calibration data 7. BES probe stability and response testing under a variety of conditions, using artificial and then actual wastewater samples to validate the response times, range, stability and other agreed factors. 8. Review and optimisation. The sensor data must be examined and the handling and stability reviewed. Once this data is reviewed then any changes that are required must be made to the design so that a design for a robust, commercially manufacturable system can be made. 9. Finalise a design for a BES-based BOD sensor with a report showing sufficient supporting data that a commercial decision on the viability of the project can be made and the information used to market the system to a commercial sensor manufacturer. The project brings together WHPartnership, University of Newcastle and University of South Wales. Together they bring necessary skills in engineering, software, microbiology and product design that are needed for the project. The universities bring the fundamental research and WHPartnership bring the expertise in industrial application.

Impact Summary

Economic Impact - Market Opportunity The market for a BOD sensor includes water companies dealing with wastewater on a range of different sized plants. For small-scale plants (2,000 - 9,999 population equivalent (p.e.)) after an initial regime of 12 samples/year only 4 samples/year are required for BOD analysis. Whereas, for medium- (10,000 - 49,999 p.e.) and large-scale (50,000+ p.e.) plants, 12 and 24 BOD samples/year are required respectively. In the UK alone, sewerage systems receive over 11 billion litres of wastewater per day which feed into approximately 1,900 treatment plants with 2,000+ p.e. and across the UK there are 588 (19,466 km) designated sensitive discharge areas. In addition to dedicated wastewater treatment plants, other companies dealing with wastewater must monitor their discharges including processing plants for: Milk, Fruit and vegetable product, Soft drink, Potato, Meat, Breweries, Alcoholic beverage, Animal feed, Gelatine and glue, Malt, Fish. Currently there are about 1,900 waste treatment plants with 2,000+ p.e. in the UK, if these were to have only a single sensor each, then if a cost per sensor of £1,000 is targeted there is a potential market of about £2,000,000 in this industry in the UK alone, with further substantial markets in the processing industries outlined above. Expanding into Europe and North America the market would be expected to be over £20,000,000. There is also scope to exploit the technology in as a simple low cost alerting device to show when BOD levels have been breached, meaning the technology could be of significant benefit in developing countries. Economic Impact - Reduced costs to Wastewater industries The current BOD test that the waste water industry is required to undertake is expensive and time consuming. Companies are keen to have a low cost, robust sensor. As well as reducing monitoring costs, the online sensor will enable companies to carefully manage and optimise their industrial processes to control BOD, avoiding any fines associated with a breach in discharge limits and any associated bad publicity. Regulatory/Policy Impact - The current BOD test is lengthy (and hence expensive) and delivers results many days too late to correct any faults within the system under test. This has driven the regulatory landscape towards a very infrequent testing regime that may miss infringements that lead to fines to companies if detected. The online sensor developed in this project will enable water quality to be monitored more closely, and thus enhancing information available to the regulator (Environment Agency), and improving the safeguarding of water quality. The sensor could be an important tool in ensuring compliance with the Water Framework Directive. Environmental Impact - There are clear environmental benefits to having improved control of the BOD in discharged water, where areas downstream of the treatment plants are no longer subject to wild fluctuations in BOD and a stable ecology can be managed. Better control of BOD will lead to health benefits for those people who live downstream of waste treatment plants, where unexpected BOD breaches will no longer risk the environment or release of noxious materials. On a global scale, water quality is a top priority and as populations and industrialisation increase, maintaining good water quality and tracing pollution sources will continue to grow in importance.

Committee	Research Committee A (Animal disease, health and welfare)
Research Topics	Microbiology, Technology and Methods Development
Research Priority	X – Research Priority information not available
Research Initiative	Innovate UK (TSB) [2011-2015]
Funding Scheme	X – not Funded via a specific Funding Scheme

Associated awards:

BB/P000193/1 Online Microbial Fuel Cell biofilm-based BOD sensor

I accept the terms and conditions of use (opens in new window)

export PDF file

back to list new search