Award details

An optically sectioning microscope designed for high speed high resolution random access multi-point scanning of single cells and microcircuits.

Reference	BB/E00461X/1
Principal Investigator / Supervisor	Professor Nicholas Hartell
Co-Investigators / Co-Supervisors
Institution	University of Leicester
Department	Cell Physiology and Pharmacology
Funding type	Research
Value (£)	323,423
Status	Completed
Type	Research Grant
Start date	01/06/2007
End date	31/05/2010
Duration	36 months

Abstract

With the rapid development of fluorophores that can detect changes in voltage or alterations in ion or second messenger concentrations, modern optical recording techniques permit the generation of spatio-temporal maps of a wide range of intra- or inter-cellular signalling events. These methods provide an enormous potential for rapid, high throughput analysis of large number of structures or points of interest. However, imaging systems that are capable of high spatial resolution generally suffer form poor temporal resolution, and vice verse. Very few systems are capable of sampling at speeds necessary to resolve the voltage changes accompanying a single action potential from more than one point while maintaining sub-cellular spatial resolution. Standard, inertia-limited, optically sectioning microscopes use mirrors to position a light source across an entire field of interest. Much of the scanning time is wasted because it is recording information from the gaps between complex, non-contiguous morphologies of dendritic structures or neuronal networks. We aim to develop two configurations of optically sectioning microscope implementing more efficient, non-scanning techniques that allow standard full frame scanning but also high speed (>1 KHz) scanning from up to 25 user selected, non-contiguous points of interest. Two designs will be developed and evaluated. The first configuration will use an array of digital micromirrors for both programmable, random access point illumination of the specimen and for spatial filtering allowing optical sectioning. In the second system, higher laser positioning speeds will be obtained using a novel acousto optical device that is specifically designed to work in both x and y planes and which provides uniform beam intensity. Successful implementation will lead towards the development of a low cost, 'solid state', high speed confocal imaging system capable of operating at very high speeds.

Summary

Fluorescent molecules absorb light energy at one wavelength and emit light at a longer wavelength. This property is harnessed in fluorescence microscopy; because the excitation and emission wavelengths of light can be optically separated, structures labelled with a fluorophore can be selectively visualised. However, illumination reveals not only parts of the labelled specimen that are in focus, it reveals areas above or below the focal plane, obscuring detail and reducing resolution. Confocal microscopes circumvent this problem by optically sectioning the specimen by removing unwanted light originating above and below the focal plane. In standard confocal systems, a small point of light, usually supplied by a laser, is focussed onto the specimen and scanned point by point across the entire field of view. Emitted light is directed towards a pin hole positioned in the conjugate primary focal plane of the specimen. An image with a finite optical thickness is produced because light originating above or below the plane of focus misses the pinhole and is rejected. Standard scanning methods use two oscillating mirrors to move the laser in x and y directions. These systems can operate at relatively high frequencies that can generate two dimensional images at near video rates (~30 frames per second). However, because the laser is moved contiguously across the whole field of view, the amount of time that the laser dwells in any one position is extremely short. This limits the amount of light collected and so increases the signal to noise ratio. Thus speed is gained at the expense of image quality. Whereas these speeds may be useful for measuring fluorescence changes associated with some biological signals, measurements of action potentials, indicators of neuronal activity, with voltage sensitive dyes for example requires sampling rates of at least 1 KHz. This is clearly not feasible with standard scanning techniques. In this proposal, we will develop two different configurations of optically sectioning microscope that are each capable of very fast scanning (up to 25 KHz) but from a limited number of selected points of interest. This will be achieved by using non scanning methods that allow rapid laser positioning to any point in the field of view in under 20 micro seconds. Increased measurement speeds are achieved by taking measurements from a limited number of non-contiguous regions of a single cell or from distantly separated neurones that comprise a functioning network. This approach is termed random access scanning. The first configuration will be implemented with a programmable digital micromirror device (DMD). This represents an array of miniature mirrors that can be independently controlled at high speed. These will be used to define patterns of non-contiguous laser illumination on the specimen. Optical sectioning can be achieved because only light emitted from the focal plane of the specimen will be reflected back along the same optical path to the mirror and reflected onto a CCD camera. Mirrors will be switched rapidly to cover the whole field of view to generate an optically sectioned image. A small number of selected sites of interest of variable size can then be defined from the field of view and scanned at very high speeds, theoretically approaching 10-15 KHz. In the second configuration, speed will be increased further by positioning the laser beam with an acousto optical device (AOD). These devices use radio frequency sound waves to deflect light An AOD that is capable of deflecting light in x and y planes will be used to direct laser light to the specimen. Optical sectioning will be achieved with a DMD synchronised to the AOD positioned in the conjugate primary image plane. This system should produce maximum scan rates of 25 KHz. Successful implementation will lead towards the development of a low cost, 'solid state', high speed confocal imaging system capable of operating at very high speeds.

Committee	Closed Committee - Engineering & Biological Systems (EBS)
Research Topics	Technology and Methods Development
Research Priority	X – Research Priority information not available
Research Initiative	Technology Development Initiative (TDI) [2006]
Funding Scheme	X – not Funded via a specific Funding Scheme

I accept the terms and conditions of use (opens in new window)

export PDF file

back to list new search